I use Cable Glands for all my outside boxes and on HB boxes In the shack
A GREAT source is Amazon….. there size is in MM so a little conversion is
needed..
To a search on “ Cable Glands “
Wayne W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of jimlux
<jimlux@earthlink.net>
Sent: Tuesday, June 5, 2018 7:38:18 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Replacing station ground J-cord connectors
Cable Gland..
https://www.grainger.com/product/2DPF7
On 6/5/18 2:13 PM, Bob Matthews wrote:
> J-Cord connectors are AKA Strain Relief Connectors. They are used for
> bringing rubber insulated multi-wire cables into fixtures, panels and boxes
> out doors. They have a swaged rubber grommet that pulls tight to the cable
> when compressed by the compression nut.
> Bob KT3RR
>
> Sent from my iPhone
>
>> On Jun 5, 2018, at 17:05, Michael Mathis <n4mik@comcast.net> wrote:
>>
>> Bob Matthews mentioned using J-cord connectors when passing coax or hardline
>> through box enclosures or panels: What is a J-cord connector?
>>
>> Mike Mathis. N4MIK
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|