[TowerTalk] mounting a dipole to the side of a tower

[Russ Dearmore via TowerTalk <towertalk@contesting.com>]

Dave,  If your redesign of the mounting hardware doesn't fix your problem I 
hesitate to suggest, since it sounds like you are using a different coax on the 
tower than which you tested previously, to verify the tower coax.  Also you may 
"dangle" the dipole very close to the mounting arm and connect with a short 
piece of coax and check swr.   Good luck and please excuse my simplistic 
suggestion.  Russ  K5ZZR
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk