Our host is being patient, as there *IS* is an RFI reflector,
http://lists.contesting.com/archives//html/RFI/
<http://lists.contesting.com/archives/html/RFI/>
however I only saw one comment that addressed the problem, from Chuck K9LC,
so thought I'd add my 2c.
Years ago when we had 3 touch lamps, I did this mod as well. Super easy.
Eventually, after a few years, all the lamps touch circuits failed, so I
removed
the touch part and installed a push button switch..but in those intervening
years..no more RFI to/from with the little choke!
Mike VE9AA
<snip>
".On a serious note, there are some reports that I have seen concerning
touch-on lamps that had similar issues. One of the solutions was putting a
RFC choke in the wire that connects to the touch "antenna". I think it was
about 4.7 mH choke.
I have a similar issue with a touch on Delta kitchen faucet . So if you
find a solution please be sure to send it to me so I can see if it solves my
issue.
Chuck K9LC.."
Mike, Coreen & Corey
Keswick Ridge, NB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|