I would put a box at the base of the tower. You can get waterproof PVC
electric boxes at Home Depot, Menard's, Lowes. Drill holes in the bottom
of the box to pass the cables up into the box. Bond everything to the
tower ground.
W1PDI via TowerTalk <mailto:towertalk@contesting.com>
Sunday, January 21, 2018 9:01 AM
I'm in the planning stages to put up a 50 ft aluminum Universal Towers
fold over tower.
I'm trying to line everything up for a March project date.
Question-tower will be approx 100' from house. I plan on bury coax and
rotor cables in PVC
Would it be wise to run cables down tower to a connection box at base
for lightning arrestees and provide an easy way to replace coax from
base to antennas if needed such as adding addl tower sections.
If so where can I find a waterproof connection box that will handle 3
RG213u, rotor cable, bus vat and arrestors?
Tom
Sent from my iPhone
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|