I buy mine from RFBat on EBay. After trying several Chinese suppliers RFBat
come out on top for quality and speed of delivery. Most of my installation is
Andrew 7/16 DIN connectors outdoors (also at the demarcation panel then PL259
at the operating bench). These appear to be equivalent quality:
http://www.ebay.co.uk/itm/7-16-DIN-Male-Plug-center-O-ring-clamp-RG8-RG213-LMR400-Cable-RF-Connector-/162617754488?hash=item25dcc60378
There is a better price for a box of 10 - eBay item number:172740524247.
They work well on RG213 and Ecoflex 10; haven't tried them on RG214 which is
0.02" bigger OD - would probably fit with a bit of lubricant on the outer to
get the clamp nut on the cable.
YMMV. No connection with the company etc.
73, David G3WGN M6O
-----Original Message-----
From: Jim Thomson [mailto:jim.thom@telus.net]
Sent: 26 October 2017 15:57
To: towertalk@contesting.com
Subject: [TowerTalk] 7-16 DIN Males for RG-213/214
Date: Wed, 25 Oct 2017 12:12:28 +0000 (UTC)
From: Byron Tatum <bjtatum1@att.net>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] 7-16 DIN Males for RG-213/214
< Hello-??? Does anyone know of a source of good quality reasonably priced?7-16
DIM male connectors, of solder/clamp type, that fit the RG-213/214 type
cables???? I am planning some future feedline upgrades for my VHF/UHF antenna
systems?and <have a lot of 7-16 DIN female connectors for my newer versions
7/8" and 1-5/8" Cablewave heliax.??? Thanks,?????? Byron W5FH
## I got all my 7-16 DIN males from steve davis...at davis rf. These would
fit RG-393 and also RG-213. Dunno about RG-214. 214 is aprx .425 OD. 213
is .405 393 is aprx .390
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|