Towertalk
[Top] [All Lists]

Re: [TowerTalk] grounding at tower base

To: "DALE LONG" <dale.long@prodigy.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] grounding at tower base
From: "Jim Thomson" <jim.thom@telus.net>
Date: Tue, 24 Oct 2017 08:06:48 -0700
List-post: <mailto:towertalk@contesting.com>
##  They do.  Its called   CPC 1.5 / 2


From: DALE LONG 
Sent: Tuesday, October 24, 2017 7:02 AM
To: Jim Thomson ; towertalk@contesting.com 
Subject: grounding at tower base

These are for grounding Rohn25 + 45.  We need something for Rohn65



<Jeff,


I know this is not answering your question, but six of the tower leg 

ground connectors that N0AX suggested here last week showed up today. 

Beautifully constructed, very robust, very easy to install. The 

connector U-bolts to the tower leg. Copper goes to a hunk of brass. The 

wire connector can accept copper strap and/or a wide range of copper 

wire sizes. There are two indentations for wire. This makes it easy to 

connect copper strap from the pour and up to two copper wires from rods 

to each leg, so it's a great splice point for the strap to the rods. An 

inspector can't help but be impressed!


https://www.cableandwireshop.com/rohn-r-cpc1-125-tower-base-ground-clamp.html

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>