Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 25g unguyed height

To: Terry Brown <n7tb@comcast.net>
Subject: Re: [TowerTalk] Rohn 25g unguyed height
From: Skip via TowerTalk <towertalk@contesting.com>
Reply-to: Skip <kj6y@aol.com>
Date: Tue, 24 Oct 2017 06:15:56 -0700
List-post: <mailto:towertalk@contesting.com>
According to the Rohn catalogue, you can go 35 ft above the bracket.  I have 40 
ft of 25G i used foe my WARC A3WS. Started with a Hygain TH3 till I got the big 
tower up.  That was 35 years ago.

Skip, KJ6Y
818-522-5421 cell
Communications Service Co
Sent from my iPad

> On Oct 23, 2017, at 9:20 PM, Terry Brown <n7tb@comcast.net> wrote:
> 
> I am trying to determine how high I can use a Rohn is 25g unguyed. 
> 
> Here is my situation:
> 
> I want to sink a 10 ft section of Rohn 25g into 3 ft of  concrete  base. This 
> will leave 7 ft. Above the base. I will then attach another 10 ft. Section 
> and attach a house bracket at the 14 ft level. This will leave the second 
> section unguyed for 3 ft above the house bracket.  How many more 10 ft. 
> sections can I add safely above that point?  My antenna will be a Mosely 
> TA33-Jr (27 lbs) wind surface area 5.1 sq. Ft. Windload 98 lbs at 80 mph. 
> 
> Rotor is Alliance HD-73. 
> 
> Thanks!
> 
> Terry
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>