> Subject: [TowerTalk] Yaesu 2800 Controller Bulb Replacement
> Message-ID: <ccbe7cb3-a02a-1f37-f053-d1839905879a@optonline.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> All:
>
> Anyone have experience changing the bulb on a Yaesu G-2800XA controller?
> A web page with illustrations would be helpful.
>
> Thanks,
>
> Tony
>
K9YC once suggested some 12v LEDs instead. These have the resistor installed,
just find 12v on the existing bulb and put a few of these in there. Something
like these will work…
https://www.amazon.com/gp/product/B007O1WWTA/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
73 -steve wu9b
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|