Towertalk
[Top] [All Lists]

Re: [TowerTalk] Marine Grade Coax -- NOT!

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Marine Grade Coax -- NOT!
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Tue, 26 Sep 2017 00:03:26 -0400
List-post: <mailto:towertalk@contesting.com>

I think "marine grade coax" is another specialty, or niche market that has a percentage of cheap knock offs like the so called "digital" TV antennas for which I'm seeing a new round of advertisements. The audio industry with super high price wire and tubes for the unknowing was another place for cheap stuff at high prices.

There is junk coax advertised to us too, so when a knock off shows up, I wait for others to try it out.  Not all that inexpensive coax is junk, some of it has proven to be as good as the original and some hasn't.  I suspect the marine environment is much the same.

The words, "marine and aviation" carry with them the insinuation that those cables are every bit as good as the high priced spread, but there is no guarantee that they are as good as the real thing.  If it's really good enough for a certified airplane, it WILL be expensive.  When we purchase a new name coax it rarely comes with a warranty that it meets the demands of the marine, or aviation industry.

Quite some years ago (over 30) some of the local hams made connections that allowed them to purchase coax at substantially reduced priced.  Some of the first was of outstanding quality. It was a quasi air core, similar to what we think of as the old 9913.   OTOH a batch of the most flexible RG-8 size cable I've ever seen came through. It would put today's LMR-400UF to shame. It had substantial braid coverage too, but it had an odor I didn't like. Since when did coax have an odor?  Color? IIRC It was a light gray.

I purchased enough to use for rotator loops on my 3 rowers at the time with enough extra for a planned 4th. IOW, not very much. Those loops were up through a summer back in the 70s... Hmmm...That's a lot more than 30 years, it's closer to 50.  At any rate, I noticed a buildup on the rotator loop while on one of the towers and that odor was strong from several feet away.  I decided to replace those loops. The buildup looked like disgusting scabs and the cable was sticky. That was the end of cheap coax.

73, Roger (K8RI)

On 9/24/2017 Sunday 4:58 PM, Jim Brown wrote:
Several years ago, I did a friend a favor by providing guidance about suppressing RFI to the HF installation on her sailboat. As you might guess, I gave her a bunch of ferrite cores. In appreciation, she gave me a short length (turned out to be 28 ft) of a so-called "Marine Grade" coax with an Ankor brand. It had laid on a shelf outside the shack until I picked it up a few days ago, put a connector on one end, hooked it up to my VNWA, did a TDR sweep, made 5 MHz to 100 MHz shorted and open impedance sweeps, and fed them to ZPlots to compute Zo, VF, and attenuation.

Results were unimpressive, but unsurprising given a physical examination of the cable. It's labeled RG213, has a flimsy outer jacket that is easily nicked, a tinned copper braid that's also easily nicked, and what appears to be a stranded copper-clad steel center! Loss was 0.77dB/100 ft at 10 MHz, VF was 0.669. The outer jacket came to me nicked in one place (a slice about 0.5 in long), and there was obvious staining from corrosion of shield that lay beneath it.

The Ankor website describes their RG213 as having a "premium tinned copper center conductor as well as a tinned copper outer braid for corrosion resistance and easy soldering. It features signal loss ratios of up to 50 percent less than other coaxial cables. 96 percent braid provides best signal strength and least interference with UV inhibited white jacket for longest life." The website contains no specs.

In fact, loss is significantly greater than ordinary good quality RG8 and RG213 from companies like Belden, Times, and Davis RF, and physical properties are significantly worse. Amazon sells a 100 ft length for $95. And they'll sell you Shakespeare-branded gold PL259-knockoffs for $12.87 EACH!  A gold plated barrel (also a knock-off) will set you back $11.74. Compare with great coax like Buryflex with AWG 9.5 stranded copper shield, foil plus tinned copper braid shield, and really nice UV-resistant PE jacket. 100 ft costs you $0.89/ft.

This marine stuff is on the level of the ultra-expensive but useless stuff sold to high-futility folks!

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


--

73

Roger (K8RI)


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>