> # The K7NV mast clamp for the OR-2800 rotor is a real treat, but it
only works for one diameter.
He can build them for any diameter you want. The K7LXC version is for 2
inch OD only.
Actually the K7LXC version is also available in 3" OD. And since we
use U-bolts, it'll accommodate masts that may be slightly smaller. A customer
of mine bought the K7NV for what he thought was a 3" mast which turned out
to be 2-7/8" which caused us no end of headaches trying to shim it and get
it to hold the mast effectively. My clamp would have accommodated it with
no problem. Unfortunately I only had the 2" version at the time. BTW the
K7NV clamps are much more expensive than the Champion Radio ones - 33% more
for the 2 incher and 55% more for the 3" version.
And he doesn't build them for any diameter since he has to have enough
for a production run. He said he couldn't supply the aforementioned one
that my customer needed.
Cheers,
Steve K7LXC
TOWER TECH
and
championradio.com
Cell: 206-890-4188
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|