Towertalk
[Top] [All Lists]

Re: [TowerTalk] Wire antenna in trees? (Patrick Greenlee) (Kelly Taylor)

To: Clay Autery <cautery@montac.com>
Subject: Re: [TowerTalk] Wire antenna in trees? (Patrick Greenlee) (Kelly Taylor)
From: Paul Plants <w3plp@verizon.net>
Date: Sun, 6 Aug 2017 14:38:23 -0400
List-post: <mailto:towertalk@contesting.com>
MTW comes in more strands.

Paul
W3PLP
Sent from my iPad Air 2

> On Aug 6, 2017, at 1:44 PM, Clay Autery <cautery@montac.com> wrote:
> 
> Correct...  THHN is not intended for use as exterior antenna wire, but
> it surely does work well...  I can get it in any color I want and in a
> 2500+ foot spool, et al.
> 
> I can replace a LOT of 80m loops for not very much money...  Although,
> mine has been up for 18 months now, stretched tight in FULL sun, and the
> clear "pulling layer" has only just begun to fray.  The gray insulation
> coat is fully intact.  Gray virtually disappears into both the sky and
> trees.
> 
> Trick to using annealed copper wire is keeping the pivot points in large
> diameter...  I use 4 inches, but would use larger if I could find
> cheap/larger pulleys.
> 
> Also... there are different types of THHN/THWN...  some with 7 strands
> and some with 19 strands... I prefer the 19 strand version.
> 
> I don't find the insulation particularly thin OR stiff...
> 
> 
> 73,
> 
> ______________________
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
> 
>> On 8/6/2017 11:30 AM, David Gallatin via TowerTalk wrote:
>> 
>> THHN is in no way meant for use as exterior antenna wire. The nylon (N) 
>> coating is thin and stiff. 
>> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>