Yep!!
http://www.nn4zz.com/tiltplate.htm
The picture on this page shows the Heights Tower and Tilt Plate serial#
0001 that I bought and retrieved from the original owner in PA...
LOVE the tilt plate!
73,
______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 7/22/2017 5:24 AM, Roger (K8RI) on TT wrote:
> Use a "Tilt Plate"
>
> 73, Roger (K8RI)
>
>
> On 7/22/2017 Saturday 4:20 AM, Jim Thomson wrote:
>
> <snip a bunch>
>>
>> ## The real trick will be.... with the tower in horz position,
>> mounting the yagi onto the mast. The eles of the yagi cant be 90
>> degs to the mast, or the tips will be embedded into the dirt. Eles
>> will have to be inline with the tower. If the els are really long,
>> like a 30M yagi, then you also have to worry about the nested height
>> of the tower vs one half of the 30M ele length. Once tower is
>> moved to the vert position, somebody is gonna have to go up there,
>> then rotate the boom clamp assy, by 90 degs so the eles are parallel
>> to the dirt.
>>
>> Jim VE7RF
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|