I am planning on putting up a 160M inv L. The horizontal leg will attach to
asupport off the side of the tower about 80 feet high. I have a 40 meter 2
el yagi
on the tower mast which will be about 6 feet above the inv L leg going out
from the tower.The inv inverted L horizontal leg will slope down approx 20
degrees.
Do you think I will have problems with interaction between the 40M yagi
and the inv L with this arrangement ?
Maybe if I rotated the 40M yagi so it is at right angles to the inv L wire
when Ioperate on 160 would help prevent any intereaction ?
BobK6UJ
_______________________________________________
Bob,
I did have interaction between my inverted L and my 40 yagi which is 5 ft
over it. It was specially noticeable when the elements of the yagi were
parallel to the horizontal portion of the L. I partially solved
the situation by lowering the L and now is sitting 10 ft below the yagi.
Slightly performance on TB but no more interaction problems. 73s
Fernando EC1CT - KD0IGJ
ec1ct@esbesaya.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|