I'm toying with the idea of putting a Power over Ethernet camera at the top of
my tower, but don't want to defeat all the grounding work that I've done and
provide an easy path into the house via the Ethernet. Most of the
lightning/surge gear I've seen for Ethernet looks pretty light-weight and for
indoor use. Ideally, I'd want to provide a path to ground at the base of the
tower, as I do for all the coaxes, as well as a lightning protector in the
enclosure box that I have on the side of the house (filled with PolyPhasers).
This probably is a bad idea and I won't go forward with it, but thought I would
check to see if anyone on this list has experience doing this and if there is
an economical solution out there. Thanks and 73, John/K9KE
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/towertalk
|