Yes. Craig (Rotor Doc) says he doesn't have any and Hy-Gain doesn't stock much,
and the rotator was a modified farm implement unit (NOT manufactured by
Hy-Gain).
I'm open to other suggestions... manufacturer & pn or even just the
manufacturer. I have four part numbers for a Guardian solenoid that MAY work.
Are there any others?
tnx es vy 73,
Bryan WA7PRC
From: Dwight <n2fmc@verizon.net>
To: Bryan WA7PRC
Sent: Sunday, May 21, 2017 5:42 PM
Subject: Re: [TowerTalk] Hy-Gain HDR300 Rotator - Brake Release Solenoid
Have you checked with Norms Rotor repair or Rotor Dr.?
Dwight
> On May 21, 2017, at 20:26, Bryan WA7PRC wrote: >
> Hi Folks,
>
> My olde Hy-Gain HDR300 rotator's brake release solenoid has gone open.
> It appears the OE replacement is not readily available. I'd defeat the DOA
> solenoid but, I'd rather not leave my big F12 yagi to pinwheel in the wind.
> I have identified a /possible/ workaround using an off-the-shelf part from
> Guardian. My question: does anyone have a recommendation for an OE
> or exact-replacement part?
>
> tnx es vy 73,
> Bryan WA7PRC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|