The cast clamps used on Diwa, Wilson, Greate, Yeasue. are fantastic except
one weakness. there tightening sequence .
With the base bolts and the mast bolts need to be tightened as specified .
Wayne W3EA
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of David Robbins
<k1ttt@verizon.net>
Sent: Thursday, May 18, 2017 6:07 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Yaesu mast clamps
What about them? they work just fine for me. in the beginning on the
g-1000/2700/2800 series they had problems with clamps breaking, they were
replaced free of charge.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Roger
D Johnson
Sent: Thursday, May 18, 2017 20:33
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu mast clamps
Does anyone have a good solution to the cast aluminum mast clamps used on
the G-1000 rotor.
73, Roger
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|