Towertalk
[Top] [All Lists]

Re: [TowerTalk] Long Tangent U Bolts

To: Don W7WLL <w7wll@arrl.net>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Long Tangent U Bolts
From: Ken K6MR <k6mr@outlook.com>
Date: Mon, 10 Apr 2017 17:39:40 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You can get a “Universal Clamp Set” from the commercial suppliers.  It will 
clamp two parallel pipes of various sizes (up to 3” or so I think) together.  
Try Tessco or Talley, anyone who sells commercial  tower hardware.

Ken K6MR



From: Don W7WLL<mailto:w7wll@arrl.net>
Sent: Monday, April 10, 2017 9:30 AM
To: Jim Thomson<mailto:jim.thom@telus.net>; 
towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: Re: [TowerTalk] Long Tangent U Bolts

I was thinking LONG U-bolts Jim, like to fasten two 2 inch boom pieces
together or other such odd needs plus possibly a saddle and rigid plate. I
see DX Eng sells the SS or Alum saddles and a rigid plate in a set, but I
just need 1/2 of the saddle set plus the rigid plate. Also need to take into
account the fastening hardware.  That ends up a LONG U bolt. I looked at DX
Eng data on the U bolts and see the ID, thread size and length but nothing
on the C length, the OA length from the inside of the curve to the end of
the bolt thread (unless I missed something).

Don W7WLL
-----Original Message-----
From: Jim Thomson
Sent: Monday, April 10, 2017 7:54 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Long Tangent U Bolts

Date: Mon, 10 Apr 2017 07:35:31 -0700
From: "Don W7WLL" <w7wll@arrl.net>
To: "Towertalk" <towertalk@contesting.com>
Subject: [TowerTalk] Long Tangent U Bolts

Has anyone used U-Bolt-It in Houston to fabricate longer U bolts than
available in standard sizes? If so were they able to deal with small
quantities at a reasonable price (like 2 to 4 pieces)?

Don W7WLL

##  what size  bolt..and how long does it have to be ?      The SS  U bolts
I bought from DX eng  have the longest threads I have ever seen on any U
bolt.   They provide for bucket loads of
excess thread.   They also come in both  .3125 and also .375 sizes.  You can
easily have enough thread to go through say a .75 inch thick AL plate..with
plenty left over for the nut etc.

Jim  VE7RF

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>