Towertalk
[Top] [All Lists]

Re: [TowerTalk] ROHN 45 Concrete base help needed

To: towertalk@contesting.com, mthompson@mindspring.com
Subject: Re: [TowerTalk] ROHN 45 Concrete base help needed
From: K7LXC--- via TowerTalk <towertalk@contesting.com>
Reply-to: K7LXC@aol.com
Date: Tue, 7 Mar 2017 10:18:01 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>  I finally got the crank up removed so I can get to the old  concrete 
pad. If someone familiar with using
the concrete base and pier pin  can respond off line I would appreciate the 
help.
 
    All you need to do is rent a rotohammer with a  coring bit that's a 
little oversize. Drill the hole as deep as necessary  and then use construction 
epoxy to glue it in place. That's it.
 
Cheers, & GL,
Steve     K7LXC
TOWER TECH
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>