Re: [TowerTalk] radials 160

[<w5prchuck@gmail.com>]

There is a machine similar to an edger that electricians use to cut the trench 
and insert the wire all in one pass.  I think you can rent them. Maybe even at 
Home Depot.  Might be worth buying one…

Chuck W5PR

Sent from Mail for Windows 10

From: Herb Krumich via TowerTalk
Sent: Monday, March 6, 2017 5:33 PM
To: towertalk@contesting.com
Subject: [TowerTalk] radials 160

All winter I have been clearing out a large area to put radials down for a 160 
meter antennaI built an antenna which looks like a T between two 90 foot 
towersThe vertical leg is 65 feet and the horizontal is the same. 
I used it with only a few radials and was pleased with contacts to the west 
coast from Pa.So here is my questionWhat type of tool can I use to bury the 
radials an inch or so.My problem is there are quite a few surface rocks that I 
will have to deal with.Does Home Depot or Lowe's have something ?I was even 
just thinking about using a pic and draging it backwards
Preferable no motors due to the rocksThanksHerb K2LNS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk