Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna climbing harness (Rigging)

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Antenna climbing harness (Rigging)
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Mon, 27 Feb 2017 15:26:47 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
"Back then" such a cover on QST would have resulted in stoning of the editor. Remember all those eons of dull and drab Geeves cartons that were run over and over and over? I think, however, there was a political message behind this cover to try and reach out to the distaff side. Unfortunately the egregious safety errors weren't vetted properly by proper review by professionals who know tower climbing safety. In this area there is no excuse.

Herb Schoenbohm, KV4FZ


On 2/27/2017 3:07 PM, Ed Karl wrote:
How come the knot on the fall arrester is not tight, before the tie wraps (huh?)

On the other hand, I was 14 a l-o-o-ng time ago. Back then this might qualify as a "pinup"for the shack.

73!  ed K0KL

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>