I am far from being a tower expert however I once installed a 160' Rohn 65
tower on an old crankup tower base and I just used anchor concrete from Home
Depot to set the pier pin in an oversized hole. This is different than
epoxying bolts for a free standing tower where you need maximum adhesion.
The base worked perfectly for a number of years until I moved.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Epoxy for Pier pin in Rohn concrete base
From: Dave Thompson <thompson@mindspring.com>
Reply-to: Dave Thompson <thompson@mindspring.com>
Date: Mon, 6 Feb 2017 17:28:12 -0500 (GMT-05:00)
I think I have arranged most of the Rohn 45 that I need and have the
concrete
base and pier pin. I need to drill a hole for the pier pin and lost the name
of
the epoxy (Quikcrete brand?). I know it sets in about 2 days.
Thanks to everyone for the help.
73 Dave K4JRB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|