That was from me, Steve, NR4M
On 1/13/2017 2:34:PM, Steve, NR4M wrote:
Hello Charlie. I don't know why. I've done it both ways with each installation
working quite well. And it may be something like, depending upon the phasing,
unequal currents in the radial wires. if they're just laying across each other
randomly, there may be a difference a potential causing some kind of noise,
like some kind of common mode noise. When you find out let me know.
Sent from my iPhone
On Jan 12, 2017, at 11:31 PM, <n0tt1@juno.com> <n0tt1@juno.com> wrote:
Gents,
About on-the-ground radials for vertical phased arrays...some
"instructions"
have said to connect the ends of the radials to a "buss" that (more or
less)
divides the 4 elements in say, a 7mhz 4-square.
My question is why do that....Is it just to save on radial wire
or is there a technical reason for connecting them to a buss?
Thanks,
Charlie, N0TT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|