Yes. Ron K6EVR, Bud W6VPH, et al were in Pasadena in about 1968 making RF
Speech Processors for the Drake C Line and other radios. I stopped by on my
way home from ASU during semester break. Just a hole in the wall on a second
story building off the freeway. I was surprised but got what I wanted.
You are stretching my memory...HiHi
73 Hardy N7RT/4
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Ken
K6MR
Sent: Monday, January 02, 2017 4:42 PM
To: Don W7WLL; towertalk@contesting.com
Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
Wasn?t the ?original? DX Engineering the RF Speech processor folks from the
late 1960s? W6UED and some others I can?t remember?
Ken K6MR
From: Don W7WLL<mailto:w7wll@arrl.net>
Sent: Monday, January 2, 2017 1:34 PM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
DX Engineering, Inc. was involuntary dissolved on Aug 24, 1995. The
principals were Lew Sayre, W7EW and Bill Sattler N0XX. Lew has an email
address on QRZ, Bill does not. The original DX Engineering, Inc. was located
in Brownsville OR and was formed in June of 1989.
Don W7WLL
-----Original Message-----
From: Wayne Kline
Sent: Monday, January 02, 2017 1:05 PM
To: W0MU Mike Fatchett ; towertalk@contesting.com
Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
Hi TT'ers
Mike I think Dudley W5DUD is talking about the old " DX Engineering " that
resided in Brownsville, Or. 97327
I can't remember this hams call ??
I installed few of his antennas in the late 80's early 90's The element
to boom were black some kind of plastic extrusion. similar to M2
Wayne W3EA
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of W0MU Mike
Fatchett <w0mu@w0mu.com>
Sent: Monday, January 2, 2017 3:49 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
Did you try DX Engineering?
On 1/2/2017 1:26 PM, Dudley Parkin wrote:
> Hello all , in need of some parts for an old Dx Engineering 15 meter
> yagi, insulated Boom to Element Brackets,the Boom is 2 in , In
> Diameter and elements I think are ½ inch, Thanks W5DUD
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page -
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT
members have lots of helpful information and are happy to share it.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page -
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT
members have lots of helpful information and are happy to share it.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|