Re: [TowerTalk] Telrex Rotator

["Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>]

Now here's a rotator (first two photos) built along the lines you 
describe, but on steroids!
http://www.rogerhalstead.com/ham_files/skyhook.htm  It's turning many 
tons with a whale of a wins load.  It used a double chain IIRC.
73

Roger  (K8RI)


On 12/14/2016 10:21 PM, john@kk9a.com wrote:
> At my previous QTH, I replaced a Hy-Gain rotator that broke nearly every year 
> with a Telrex rotator. It was up for at least five years and I never had an 
> issue.  It is a very simple device, just a large A/C motor attached with a 
> chain to a gear box and a selsyn indicator. I am sure that it would not be 
> difficult to use a more modern controller with one or even build something 
> similar from scratch without spending a lot of money but there does seem to be 
> little interest in this type of rotator.
>
>   
>
> John KK9A
>
>   
>
> From: Mike [mailto:w2gr@aol.com]
> Sent: Wednesday, December 14, 2016 7:52 AM
> To: john@kk9a.com; towertalk@contesting.com
> Subject: Re: [TowerTalk] Telrex Rotator
>
>   
>
> I'll look when I get home...I have the diagram in my files...
>
>   
>
> I use a Telrex. .and just sold one...tried to sell it in the USA...and  can't 
> believe noone wanted it!..I even had it at Dayton flea market..if i had a 
> dollar for everyone that looked at it and commented on it...i could have 
> scrapped it!
>
>   
>
>   I ended up selling and shipping it to Namibia of all places to a scout camp 
> radio club.
>
>   
>
> 73
>
> Mike W2GR
>
>   
>
>   
>
>   
>
> Sent from my Verizon Wireless 4G LTE smartphone
>
>
>
> -------- Original message --------
> From: john@kk9a.com
> Date: 12/14/2016 7:06 AM (GMT-05:00)
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Telrex Rotator
>
> I probably have one somewhere but I cannot immediately locate it. As I
> recall the wiring is pretty straight forward and easy to follow, selsyn,
> a/c motor, and limit switches.
>
> John KK9A
>
>
> To: <towertalk@contesting.com>
> Subject: [TowerTalk] Telrex Rotator
> From: "Roger Grandbois" <rgrand@shaw.ca>
> Date: Tue, 13 Dec 2016 10:27:07 -0800
> List-post: <towertalk@contesting.com <mailto:towertalk@contesting.com%22> 
> ">mailto:towertalk@contesting.com>
> Hi,
>
> Does anyone have a copy of the schematic for the 12 terminal Telrex
> Rotator/Controller Wiring?
>
> Particularly the Controller/Motor wiring but any and all info would be
> helpful !
>
>
>
> 73
>
> Roger VE7LB
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

--

73

Roger (K8RI)


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk