Hi John,
It would be nice to add a cap. But I won't climb a crank-up without cranking
it down. And this would be a pain. Trying to find an easier solution.
73,
N2TK, Tony
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Monday, November 07, 2016 8:31 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Matching 40M
Could you install a switchable capacitor antenna feedpoint?
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] Matching 40M
From: "N2TK, Tony" <tony.kaz@verizon.net>
Date: Sun, 06 Nov 2016 12:04:59 -0500
Years ago some of us used an L-C network made from a variable cap and a coil
to make the amp happy at the top end of 40M with our shorty-forty's.
I now have the same problem with a 3-EL 40m that is tuned for CW. The amp
does not like to put out much power at the high end of the band. Is it
possible to update that old circuit with a ferrite core and some doorknobs?
Has anyone tried this? Would I have issues with circulating current or very
high voltages trying to put this into a box to put on the output of the
1500W amp for phone contests?
I realize this does not treat the high SWR on the coax. I could put the box
at the base of the tower so that there would only be about 50' of coax to
the antenna if that makes things "better".
Tnx for any feedback
N2TK, Tony
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|