Towertalk
[Top] [All Lists]

Re: [TowerTalk] magic trick to make L5PDF-RPC one-piece DIN connector ma

To: towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] magic trick to make L5PDF-RPC one-piece DIN connector mate
From: Steve Maki <lists@oakcom.org>
Date: Sat, 29 Oct 2016 21:38:59 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The L5 connectors are only for LDF5 Heliax, which has a smaller center
conductor that AVA5.

You need either an AL5 connector, or an A5 connector. The AL5's are more
common.

-Steve K8LX

On 10/29/2016 20:00 PM, Jeff AC0C wrote:

I’ve been trying to get the L5PDF-RPC to mount on some AVA5 hardline.
It seems to not make contact with the center conductor no matter what
I do.

It’s a pretty old connector that Andrew has not made for a long time
so maybe this connector is difficult by nature to get on.  Maybe the
right answer is to just go out and buy a more modern connector?

Appreciate any suggestions.

73/jeff/ac0c www.ac0c.com alpha-charlie-zero-charlie


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>