For small and large quantities, check out boltdepot.com in Boston area.
I've used them in the past for small quantities.
73 charlie, k1xx
On 7/9/2016 3:38 PM, Don W7WLL wrote:
> MSCdirect for the 10-24 (303 or 18-8) coupling nut was $5.52 ea vs $1.02 for
> Albany (304). Shipping cost was not determined since I had to register and I
> didn’t desire to do that, but a 4 bucks a unit higher cost (I needed 4) that
> was some $17.20 difference!!!!.
>
> McMaster for the 10-24 (316) coupling nut was $7.72 ea vs $1.02 for Albany
> (304). Shipping was $2 more than Albany. Part savings alone for 4 ea would be
> $26.40!!!!!
>
> THOSE are significant differences for SS (where type is not important for the
> project at hand).
>
> I would guess the costs are higher at the two big houses because of the
> massive inventories of other types of items they carry which must be covered
> as well.
>
> But, they are reliable and known sources, along with Bolt Depot (3 bucks per
> unit higher) and other good sources.
>
> Pays to shop albeit I admit one needs to consider all the facts and that the
> cheapest price does not always mean the best deal.
>
> Don W7WLL
>
> From: Jim Miller
> Sent: Saturday, July 09, 2016 12:09 PM
> To: Don W7WLL
> Subject: Re: [TowerTalk] Stainless Steel and Other Hard To Find Fasteners
>
> other good sources in general:
>
>
> MSCdirect.com
>
> mcmaster.com
>
> On Sat, Jul 9, 2016 at 2:48 PM, Don W7WLL <w7wll@arrl.net> wrote:
>
> Was looking for a source for some SS 8-32 and 10-24 coupling nuts. Searched
> the internet and ran across a place back east (from me) which I’d not heard
> of, Albany County Fasterners. They had an very interesting selection of SS
> fasteners among other types of materials. Also have a line of brass and
> silicon bronze and a line of security fasteners which are hard to find out
> here.
>
> Compared the cost of the items and the shipping cost and found them to be
> better than I could find at other well known fastener houses.
>
> Placed the order, they shipped same day.
>
> This is a new fastener source I will keep at the top of my list. Difficult
> to drive to a hardware or marine supply store who carries SS fasteners for
> less than what the Albany shipping cost was.
>
> Just another source you might want to look into. Had not seen it pop up on
> this site before.
>
> Don W7WLL
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|