Towertalk
[Top] [All Lists]

[TowerTalk] Crimp Connector Tools?

To: towertalk@contesting.com
Subject: [TowerTalk] Crimp Connector Tools?
From: KB8UUZ <kb8uuz@gmail.com>
Date: Sat, 14 May 2016 16:24:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I've been following this thread on crimp tools and crimp connectors. I
usually don't join in since I work for a ham radio dealer, but I just could
not stand by anymore.

DX Engineering has a full line of crimping tools and crimp style
connectors.
Additionally - there will be new tools being shown at Dayton for stripping
coax cable specifically for crimp style connectors and these new tools will
not be as costly as other brands out there. They will do all three cuts in
one operation.

Complete Crimp Tool Set with Case:
http://www.dxengineering.com/parts/dxe-ut-kit-crmp2

Individual Crimper with one Die Set:
http://www.dxengineering.com/parts/dxe-ut-crmp2 - crimp tool with 8U size
die
http://www.dxengineering.com/parts/dxe-ut-crmp2-8x - crimp tool with 8X die
set

Check out the Documentation:
http://static.dxengineering.com/global/images/instructions/dxe-ut-kit-crmp2.pdf
http://static.dxengineering.com/global/images/instructions/dxe-ut-lgfrm.pdf
http://static.dxengineering.com/global/images/chartsguides/d/dxe-ut-crmp2.pdf
http://static.dxengineering.com/global/images/chartsguides/a/amp-182100_sn.pdf

Die Sets: (which by the way are compatible with top brand crimp tools - not
all crimp dies are made to do that)
http://www.dxengineering.com/search/product-line/dx-engineering-crimp-tool-dies?autoview=SKU&keyword=crimp&sortby=BestKeywordMatch&sortorder=Ascending

Crimp Style Connectors:
DX Engineering (patented):
8U size: http://www.dxengineering.com/parts/dxe-pl259cs8u-6 or -12 or -24
8X size: http://www.dxengineering.com/parts/dxe-pl259cs8x-6 or -12 or -24

Amphenol Crimp Connectors:
http://tinyurl.com/jydecog
http://tinyurl.com/zoljhhf
http://tinyurl.com/hq24fbo
http://www.dxengineering.com/parts/aml-112533-4


All at DX Engineering. Enjoy.

Tom, KB8UUZ
(yes, I work at DX Engineering)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Crimp Connector Tools?, KB8UUZ <=