There are MANY varieties of hard line of the same size, and even from
the same manufacturer, and each requires a connector that mates it
mechanically and electrically. Look carefully at the hard line you have,
find a mfr and type number, and search the internet to find specs and
mating connector types. Here's a link to notes I wrote several years ago
after going through that process for integrating several types of used
and surplus hard line into my own station. http://k9yc.com/HardLine.pdf
73, Jim K9YC
On Tue,5/10/2016 10:54 AM, n1rr@comcast.net wrote:
I have 7/8", 3/4" 5/8", 1/2" CommScope and Times Microwave hardline which is:
Non-corrugated / annular / smooth wall, some has jacket and some does not.
What manufacturers & part numbers apply to this 1997 to 1999 vintage cable for
use with UHF or Type-N ?
I'm looking for connector product details that are not DIY. I dont want to deal
with the
unreliability of using dissimilar metals such as copper reducers and other
components.
LRC
I have some parts from these. It seems that the 2-piece types will fit the .875", .75",
.625" and .500" hardline.
What are the secrets behind utilizing UHF or Type-N adapters with them s ince they
use a thread of 5/8" x 24 thread ?
Which of the know series ( K-Series, X-Series) is suitable for 1500watts output
?
I see .072" pins and also .167 pins. They are both rated to 20Amp @ 4kV.
-Charlie N1RR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|