If you decide to go with the DX Engineering trap, I would drill drain holes
in it and make sure they are pointing down. Remember this trap was
designed for a vertical.
Mike - KI8R
On Fri, Mar 18, 2016 at 9:40 AM, Joe Subich, W4TV <lists@subich.com> wrote:
> On 3/18/2016 8:49 AM, N1BUG wrote:
> >> Get someone to model for you a dipole, center fed, that has the
> >> length you can put in place.
> >
>
>> I could do a full size 40 meter dipole. This was my original plan
>> before deciding I wanted to see if 30 meters could be included. I
>> still may end up going back to this.
>>
>
> If you can do a full size 40 meter dipole, download the manual for
> the DXE 4030 vertical and duplicate it on both sides of your center
> insulator. You will most certainly need a truss since the element
> will be a little weak to self support.
>
> 73,
>
> ... Joe, W4TV
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
-----------------------------------------------
*Michael Murphy - KI8R*
mike@ki8r.com
www.ki8r.com
*614-371-8265 (cell)*
-----------------------------------------------
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|