Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: RG6 coax question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: RG6 coax question
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sun, 13 Mar 2016 11:15:26 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On Sun,3/13/2016 5:51 AM, Chuck Dietz wrote:
  I am building a SAL-30 and was going to lay
about 600-800 feet of hamfest RG-6 on the ground.  Now I ordered 1000' of
Commscope direct burial RG-6 on Ebay for $80 and will go to Home Depot and rent 
a trencher for a day for $89.

YMMV. I installed two DXE reversible Beverages soon after I moved here in 2006, and the coax to both is from a new reel I bought directly from Commscope before I moved here to run MATV signals around my Chicago home. It's good stuff, but not flooded, not intended for direct burial. That coax is laying on the ground, except for a stretch where it spans a deep gulley with a creek at the bottom of it. Those Beverages still work fine (except when a branch or tree falls on them and breaks the connection at either end). There's no way I could trench and bury most of that path -- it's through a dense forest.

73, Jim K9YC


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>