Towertalk
[Top] [All Lists]

Re: [TowerTalk] Source for renting tower and cable installation tools

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Source for renting tower and cable installation tools
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 19 Feb 2016 12:25:26 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On Fri,2/19/2016 12:02 PM, Richard Spurling wrote:
Does anybody know of a source that will rent out tools for cable assembly
work for Times, Andrew and / or RFS Cable Wave Systems?
The installation instructions for all of their hard line that I have 
seen call for nothing more exotic than a hacksaw and ordinary electrical 
hand tools. I don't claim to be an expert, but that's all I've used to 
terminate a half dozen different types of hard line that I've scrounged 
from various sources to standard connectors that match each of the 
individual line types. And matching the connector to the line is most 
important -- each type of hard line is constructed differently.
Here's a short applications note that I wrote after doing that. It 
includes a listing of connector types and sources that I found for them. 
Not intended to be all inclusive, but it's what I found for what I had 
and what I needed. :)
http://k9yc.com/HardLine.pdf

BTW -- I was able to find, download, and print out instructions for most hard line types from the internet. Google is your friend.
73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>