Towertalk
[Top] [All Lists]

Re: [TowerTalk] Can´t add egg insulator...

To: "reflector -tower" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Can´t add egg insulator...
From: "David Robbins" <k1ttt@arrl.net>
Date: Sun, 13 Dec 2015 15:52:59 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It isn't that important to use non-resonant guys.  I have 4 guyed towers with 
solid steel wires and stacks of yagis for 10m through 40m and everything works 
just as it should.

David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of J. Hunt 
via TowerTalk
Sent: Sunday, December 13, 2015 15:33
To: towertalk@contesting.com; Douglas Ruz (CO8DM)
Subject: Re: [TowerTalk] Can´t add egg insulator...

It is VERY important to use non-resonant steel guy cables on your frequency(s) 
of operation.

A resonant guy cable will have adverse radiation patterns during RX and TX.

A good example... my guyed tower was constructed years prior the 60m band was 
introduced.  
My tower is guyed at three levels.  Numerous preformed grips and egg insulators 
were used.

I rigged up a 60m dipole antenna. During the tuning process, as I neared the 
resonant frequency, the SWR suddenly sky-rocketed.
Reason - two of my guy cables were resonant within the 60m band.  I scrapped 
the 60m antenna.


Thanks n 73,
James
ki5dq

--------------------------------------------
On Sun, 12/13/15, Douglas Ruz (CO8DM) <co8dm@frcuba.co.cu> wrote:

 Subject: [TowerTalk] Can´t add egg insulator...
 To: towertalk@contesting.com
 Date: Sunday, December 13, 2015, 8:47 AM
 
 Hi guys,
 
 I read about resonant guy wires.
 
 Unfortunately i can´t add egg insulator to build non resonant guy wires. I 
don´t have enought clamps or guy grip (preform) to install egg insulators.
 
 Maybe someone know any other solution.
 
 I have been modeling my tower on MMANA and i don´t see any interaction with my 
HD spiderbeam for 10, 15 and 20m.
 
 My guy wires lengths are: 20 ft (the 1st level ) and 30 ft (the 2nd level).
 
 any tips are welcome.
 
 73....Douglas, CO8DM
 
 "No creo que haya alguna emoción más intensa para un inventor que ver alguna 
de sus creaciones funcionando. Esa emoción hace que uno se olvide de comer, de 
dormir, de todo." - Nikola Tesla  
_______________________________________________
 
 
 
 _______________________________________________
 TowerTalk mailing list
 TowerTalk@contesting.com
 http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>