There is no simple answer. Modeling can show interaction with antennas
hundreds of feet away. Typically interaction is not very bad and if you can
avoid beaming though a tower for your popular directions it should be
minimal. Horizontal antennas typically do not see the other tower just the
antennas but your VHF/UHF beams may be effected by the tower also if
vertically polarized.
John KK9A
To: TowerTalk@contesting.com
Subject: [TowerTalk] tower spacing
From: w5jmw@towerfarm.net
Date: Sat, 05 Dec 2015 14:24:30 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have a hdx 555 and a ndx 455.I will be using one for hf and the other for
vhf/uhf.My question is how close can they be to each other? I realize they
should be as far apart as possible buton a lot and for the coax runs
etc..what is a good distance? thanjks all w5jmw john
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|