Luciano,
I would recommend you buy the tubing and build whatever you want.
I doubt where you are located you need the additional front to back and
bandwidth that the 4 element OWA will provide over a 3 element Yagi. The gain
will be about the same.
If the tower or rotator isn't good enough for a full sized Yagi, build a W6NL
style Moxon. It will be inexpensive and work as well or better than any of the
commercial 2 element designs.
73... Stan, K5GO
Sent from Stan's IPhone
> On Oct 24, 2015, at 8:17 PM, luciano_nachif@yahoo.com via TowerTalk
> <towertalk@contesting.com> wrote:
>
> I've been thinking about buying a 3 or 4 elements 40m yagi for long now. I've
> talked to factory representatives at Dayton hamvention but haven't heard from
> those who actually own them.
>
> Having said that, which 3 or 4 elements 40m yagi would you recommend, please?
> Would you consider a linear loaded one like M2 40M4LLDD or would you go for
> the full sized one such as the JK404 Grande from JK Antennas? Cost benefit is
> of utmost importance as the Brazilian Real x American Dollar rate doubled in
> the last months.
>
> 73,
>
> Luciano PT9KK
>
> Sent from my HTC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|