Towertalk
[Top] [All Lists]

[TowerTalk] Pulleys

To: towertalk reflector <towertalk@contesting.com>
Subject: [TowerTalk] Pulleys
From: Mike Reublin NF4L <nf4l@comcast.net>
Date: Tue, 8 Sep 2015 20:35:32 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I found a couple of bad pulleys today on my HG70-HD. On one the bearing has 
visible cracks around it in a regular pattern, on another the bearing is 
completely gone. Still have 2 to check. I had bought replacements from 
McMaster-Carr a bit over a year ago. They are steel and the bearing is fairly 
thin.. I had one used pulley in my junk box which has a much thicker bearing, 
not sure if it was an original.

ANYhoo, I need a source for new pulleys, and a reason to the failure of these 
two.

73, Mike NF4L


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>