I used some small 1/2 CPVC pipe with Tees at each end. I band- sawed one
of the tees length-wise that screwed to the building to make it somewhat
flat. Drilled a cross hole in the other Tee and tied the ladder line
with Ty-Wraps to it, worked great and cheap!
73 Dwight NS9I
On 8/12/2015 10:00 PM, Lee wrote:
I'd be curious to know of some inexpensive way of supporting ladder
line or open wire line along a building. I realize The Wireman has an
insulator for tower mounting but the things are over $3.00 each. Not
good if you need a bunch of them. I have heard maybe someone is using
electric fence insulators but for the life of me I can't see any large
enough to keep the line a safe distance from a structure. (An inch or
so doesn't seem safe to me if you are running maximum legal power.)
Anyone on here with some suggestions?
Lee, w0vt
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|