Replace all cables and really inspect the sheaves. In addition, check for
strucural bends and rust.
Semper Fi,
Tommy - K6YE
DX IS and CW RULES
----- Original Message -----
From: Sam Barrett <w5kf@prodigy.net>
To: towertalk@contesting.com
Sent: Thu, 23 Apr 2015 13:38:44 -0400 (EDT)
Subject: [TowerTalk] New To ME US Towers HDX-555- advice needed
I bought a used HDX-555 that is now beginning to reappear as the snow melts.
I’m hoping to get it upright this summer. I’d like advice on what to do prior
to standing it up.
I am not sure how long the tower was down, prior to its transportation to me. I
believe that it is about 15 years old, and it came from a SK.
Specifically, I am wondering about the cables. Should the cable on the raising
fixture be replaced? Should I replace or service the lift cables in any way?
Any advice about PM for the raising motor assembly? Should switches (limit,
raising, etc) be changed?
Above all, I want to be safe here. So, I’d take any tips on steps to take prior
to actually bolting on an antenna and standing the thing up.
Regards and 73,
Sam Barrett - W5KF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|