There's nothing wrong with making a flat top plate for the light duty
25G, or even the 45G as long as the material is of the proper thickness
and the welds are good. I have both (no extras.) and would not
hesitate to make my own.
73
Roger (K8RI)
On 4/2/2015 8:58 AM, Mike Ryan wrote:
A local friend here in the Tampa Bay area is going to finish up his
60ft tower this weekend. I just found out this morning that he is
going to use some sort of home made rotor shelf style plate with holes
cut for a TB3 as the top. This is disaster in the making especially
since I have some idea about what antennas he plans to put above it.
Does anyone have one of the short top bolt on sections or anything
else from the accepted array of products to do this job correctly,
which they would be willing to part with? Thanks... - Mike
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|