Towertalk
[Top] [All Lists]

Re: [TowerTalk] Side-mounting a yagi on a Luso tower (on the bottom towe

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Side-mounting a yagi on a Luso tower (on the bottom tower section)
From: Tim Jellison <kl7wv@kl7wv.com>
Date: Fri, 20 Mar 2015 12:32:41 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I installed a large Luso tower last summer and it has Yagis installed on the top of all sections except for the bottom one. I can understand why the factory is telling you that it cannot be done on the bottom section because of the cables, pulleys, weight boxes, etc, but I have to believe it would be doable if they fabricate a suitable mounting bracket (one which spaces the boom-mounting position far enough out to clear everything). I suggest that you use the "anything's possible" attitude mixed in with patience and fortitude in working through the language barrier. Good luck.

Tim Jellison W3YQ/KL7WV
KL7WV Tower Service
304 704 1196
kl7wv@kl7wv.com
www.kl7wv.com



------------------------------

Message: 7
Date: Fri, 20 Mar 2015 00:45:59 -0400
From: John W <xnewyorka@hotmail.com>
To: TowerTalk <towertalk@contesting.com>
Subject: [TowerTalk] Side-mounting a yagi on a Luso tower (on the
        bottom  tower section)
Message-ID: <BAY179-W503B38772FA8612942FB62A50E0@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

I am considering putting up a Luso telescoping (crankup) tower in order to 
avoid a challenging guy wire installation.In order for it to make sense, I 
would need to be able to side-mount a yagi at the top of the bottom-most tower 
section.(For their LUSO120US model, this means putting the antenna at 37' (or 
11.3m) above ground.)Here is the tower: 
http://www.lusotower.com/USA/tower%20120US.html
Luso tells me that it is not possible to do this because there is too much 
hardware in the way (pulleys, ladder, etc.)But looking at the photos of their 
towers, it looks to me like there might be enough room to somehow make it work.
Do you know of anyone who has side-mounted a yagi at the top of the bottom 
section of a Luso tower? If so, I would like to see a photo or at least hear 
about how it was done.
I know that antennas can be side mounted on the upper sections, so I don't need 
to hear about that. Just interested in mounting at the top of the bottom 
section.
Thanks in advance,
JohnW2ID                                        


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>