Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu rotator control help

To: "Tower Talk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu rotator control help
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Sun, 22 Feb 2015 20:58:21 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have one.  Cannot recall where I got it.  Package is labelled *P1091056*

I also have a couple of the plugs and boots for the 1000 rotoe.

73, Keith NM5G

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
K7LXC--- via TowerTalk
Sent: Sunday, February 22, 2015 1:18 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu rotator control help

Howdy, TowerTalkians --
 
     I need the 6-pin square connector that plugs into  the back of the
Yaesu controller. The p/n in the manual is ELP 06V but I can't  find that
number on the Digikey site. If you could let me know where to get one  and
any other pertinent info, I'd appreciate it. Tnx. 
 
Cheers,
Steve     K7LXC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>