Mike:
Last summer I added the WARC element conversion kit to my CL-33. It works
perfectly. Will add, the tech I spoke with at Mosley was most courteous and
the install went smoothly. The new traps and element were color-coded and
all fit as described in the Mosley WARC instruction pages. The SWR curves I
measured here match nearly exactly those Mosley specifies. I feed this beam
with RG-213. Using my CL-33/WARC I worked K1N.
Cheers,
Tom, ABØJ
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Mike
Ryan
Sent: Saturday, February 21, 2015 11:00 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Mosley Antenna Question
On another subject..any comments/reflections on the addition of the Mosley
rotatable dipole addition/option to the Mosley TA-53M or their other
antennas? -Mike
-----Original Message-----
From: Jim Brown
Sent: Saturday, February 21, 2015 11:26 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Mosley Antenna Question
On Sat,2/21/2015 8:14 PM, Jeff AC0C wrote:
> Cut the element as a DE and use a relay switched coil in the center.
> I'm not sure how that works in the trees but that design does work as
> a DE/REF
> + DIR/DE combo when the dimensions are stable.
Thanks, Jeff. There are some mechanical issues with that in this
installation.
73, Jim
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|