Towertalk
[Top] [All Lists]

[TowerTalk] Cushcraft A3S trap L and C values

To: towertalk@contesting.com
Subject: [TowerTalk] Cushcraft A3S trap L and C values
From: Dan Maguire via TowerTalk <towertalk@contesting.com>
Reply-to: Dan Maguire <djm2150@yahoo.com>
Date: Tue, 17 Feb 2015 00:12:56 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I'm trying to track down the L and C values for the type TA, TB, and TC traps 
used in an A3S.  I do not have access to any samples to measure myself.

I have the resonant frequencies so if I knew either L or C I could deduce the 
other.  For the inductance I have the number of turns and the form diameter but 
not the length of the coil nor the wire size.  For the capacitance I have the 
OD of the inner cylinder and the ID of the outer cylinder but not the effective 
length.  (And when I guess at the length the C value I get seems at least an 
order of magnitude too large, so I'm probably missing some other critical 
factor there.)

I've found several references to folks who have used a dip meter to identify 
which trap was which but that doesn't help; I already have the frequencies.

So, has anyone ever measured the L and/or C of these particular traps or know 
of any web references for the values?

Thanks.

Dan, AC6LA
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Cushcraft A3S trap L and C values, Dan Maguire via TowerTalk <=