On Mon,2/9/2015 12:29 PM, Dave Hachadorian wrote:
I use this one:
http://www.budwig.com/antenna-connector-insulators2.html
This is electrically quite nice, but needs serious strain relief if
you're putting much stress on it (heavy coax, a long run between
supports, trees that sway in the wind). When I've used them, I've added
an egg insulator above this one, clamped each conductor to secure it
mechanically, then looped the conductor down to the contacts, where I
clamped them to the contacts with copper split-bolt connectors. I also
tied the two insulators together with rigging rope.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|