Yes, it is a 500 ohm 10 turn pot. It has to be to work with the gears and
the controllers.
73,
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Friday, December 05, 2014 12:49 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Ring Rotor ?
In my opinion the Clarostat were the most problematic. Is the DX
Engineering replacement a 500 ohm pot?
John KK9A
To: "'Wayne Kline'" <w3ea@hotmail.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Ring Rotor ?
From: "Tim Duffy" <k3lr@k3lr.com>
Reply-to: k3lr@k3lr.com
Date: Fri, 5 Dec 2014 11:22:24 -0500
Here is the best pot (sealed) for TIC motors.
http://www.dxengineering.com/parts/dxe-ticgen-pot
All 18 of the K3LR TIC Ring Rotors use this one.
73,
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Wayne
Kline
Sent: Friday, December 05, 2014 11:13 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Ring Rotor ?
Preparing for some tower maintenance... I have two Older style aluminum
black box RR motors.....
OK I need to replace a POT My question is .....The original 1022 1032
were they the BLACK Pots and then Carl upgraded to the Blue " Bourns 3590S "
or is it the Black Pot "Clarostat 73JA " the better WX resistant pot
.
Wayne W3EA
PS wish I had digital I phones... to document ....years ago ...
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|