I used a Hy-Gain BN-86 with my very first tribander and after a year or two
it went suddenly went completely dead. I only used the antenna on bands that
it was designed for and never ran over KW or 100% duty cycle. I was not
happy with experience and it was the last BN-86 that I ever purchased. I
have used a Hy-Gain BN-4000 with no issues. Currently I am using Array
Solutions baluns.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Is there a good 1:1 Balun for a Beam
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Wed, 26 Nov 2014 10:25:07 -0400
Having ready all the problems with various baluns that rate from junk to
near junk I have been using the coiled cable to feed most antennas that
require a balanced feed. I would like to hear what is the best available for
a reaonable cost and design for a beam feed. Your views would be
appreciated. I have used the BN-86 for years but in fears of failure due to
rumors that I have heard, I have move it over to a 40 meter sloper.
Herb Schoenbohm, KV4FZ
____________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|