Towertalk
[Top] [All Lists]

Re: [TowerTalk] PowerPole connectors

To: "'Bill Turner'" <dezrat@outlook.com>, "'Towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] PowerPole connectors
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Tue, 18 Nov 2014 13:21:48 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
What a waste of towertalk reflector messages.  No wonder I am getting so
many messages.

Keith NM5G

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Bill
Turner
Sent: Tuesday, November 18, 2014 12:20 PM
To: Towertalk
Subject: Re: [TowerTalk] PowerPole connectors

------------ ORIGINAL MESSAGE ------------(may be snipped)

On Mon, 17 Nov 2014 15:26:06 -0800, Jim Lux wrote:

>
>StaKon ring lugs from #8 screws are 66.45/100 from Grainger for the 
>blue AWG 12-14, that's $0.66 each.  So to wire up two wires, it would 
>be $1.32, which is *more* than the power pole.

REPLY:

Mouser has ring terminals for 10-12 wire with #8 hole at $10.03 for 50,
Mouser part number 7113K48. 

To wire two wires would be 40 cents. 

They also have that size uninsulated at $11.21 per 100 if you don't mind
using heat shrink or electrical tape. Or nothing. 

Like the song says, you gotta shop around. 

73, Bill W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>