1. maybe, but you probably won't notice it. mine pass near towers, guy
wires, and under radials for raised 160m and 80m verticals and seem to
function fine.
2. probably, I put one rod then added some random length radials to improve
coupling to the ground just in case.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
Vytenis Sciucka
Sent: Monday, November 10, 2014 12:44
To: towertalk@contesting.com
Subject: [TowerTalk] Beverage reconstruction
Hello guys,
Before I start reconstruction of my 2 bidirectional beverages I wish to get
two questions answered.
1. One of beverages will pass close to the tower which is about 1m in
diameter at the bottom. ~3ft. Passing distance about 2 meters. Will it
negativelly affect bv performance?
2. As much as I know, grounding is more important for near end and not so
important at the far end where most often 1 ground stake is adequate. But
that's for one direction BV. If BV is bidirectional. Two wires and
transformer at the end, far end grounding quality becomes as important as it
is in the near end?
------
Vytenis
ly2kz <http://ly2kz.blogspot.com>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|