Towertalk
[Top] [All Lists]

Re: [TowerTalk] Issue with new gearbox on HDX689

To: "'Richard (Rick) Karlquist'" <richard@karlquist.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Issue with new gearbox on HDX689
From: Rich Hallman - N7TR <rich@n7tr.com>
Date: Sun, 9 Nov 2014 16:21:49 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The best price I found On Mobile SHC 634 was at a local company that also 
ships...

http://www.use-enco.com/CGI/INSRIT?PMAKA=325-6005

If you remove the top vent plug you can full from there...also pull the side 
hex screw that is almost even with the main large drive shaft that has the 
chain sprocket on it.  Fill till oil starts to come out.

Hope this helps...

73  Rich

-----Original Message-----
From: Richard (Rick) Karlquist [mailto:richard@karlquist.com] 
Sent: Sunday, November 09, 2014 8:13 AM
To: Rich Hallman - N7TR; towertalk@contesting.com
Subject: Re: [TowerTalk] Issue with new gearbox on HDX689



On 11/8/2014 4:44 AM, Rich Hallman - N7TR wrote:

 >All gearboxes have been filled with Mobile One 634 Synthetic gear oil  >as 
 >recommended by Hub City.

Where can this oil be purchased?  (Hub City perhaps?) How do you know when the 
oil level is correct?

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>