Towertalk
[Top] [All Lists]

Re: [TowerTalk] RTV

To: Mike Reublin NF4L <nf4l@comcast.net>
Subject: Re: [TowerTalk] RTV
From: Barrie - Yellowstone Photo <barrie@yellowstonephoto.com>
Reply-to: Barrie - Yellowstone Photo <barrie@yellowstonephoto.com>
Date: Thu, 6 Nov 2014 14:48:57 -0500 (EST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mike:
 
Just went into the garage and found "Permatex High-Temp Red RTV Silicone Gasket
Maker".
 
Think that may work?
 
73, Barrie, W7ALW
 

> On November 6, 2014 at 1:20 PM Mike Reublin NF4L <nf4l@comcast.net> wrote:
>
>
> If there's a pet store handy, they should have a non acetic acid aquarium
> sealant. Auto supply stores sell a similar (or maybe the same) material as a
> gasket maker. The big box stores may even carry one.
>
> 73, Mike NF4L
>
> > On Nov 6, 2014, at 12:26 PM, Barrie - Yellowstone Photo
> > <barrie@yellowstonephoto.com> wrote:
> >
> > Hello:
> >
> > Need some advice on RTV. I have a tube of Dow Corning 3145 which I was
> > planning
> > to use today.
> > However, upon opening it I discovered that it has become too thick to flow.
> >
> > I was planning to put an antenna up this coming Saturday, so I don't have
> > time
> > to order something
> > exotic. Is there something I might find at ACE Hardware, or the big box
> > stores
> > that would be okay
> > to use?
> >
> > TIA & 73, Barrie, W7ALW
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>